Canon GENERIC "S" SERIES RESET CODE PRINTER "CANON"

Waste Ink Counter Reset.
  1. Turn off the printer.
  2. Press and hold the RESUME button, then press and hold the POWER button.
  3. Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). The printer’s carriage will “reset” or move momentarily. If the above was properly performed the printer will enter the “Service Mode”.
  4. Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.

1. Service/Factory test printout, including ink sensor check.
2. EEPROM – Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point – However it is best leave them unaltered – You have been warned!)

After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

Canon PIXMA iP1000

Waste Ink Counter Reset Manual for Service mode

  1. Turn off the printer. And disconnect the printer cable.
  2. Press and hold the POWER button, turn on the printer.
  3. The indicator (L.E.D.) should be green.
  4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
  5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
  6. Release both buttons.

Canon PIXMA iP1500

Waste Ink Counter Reset. Manual for Service mode

  1. Turn off the printer. And disconnect the printer cable.
  2. Press and hold the POWER button, turn on the printer.
  3. The indicator (L.E.D.) should be green.
  4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
  5. Press and release the RESUME button again, the indicator (L.E.D.) should be green
  6. Release both buttons

Canon i320, i255
Waste Ink Counter Reset.

Methode 1: Manual Temporary

  1. Unplug power and USB.
  2. Open door and hold power button.
  3. Connect power.
  4. Close door, then release power button.

Methode 2: Manual Temporary

  1. Turn off the printer. And disconnect the printer cable.
  2. Press and hold the POWER button, turn on the printer.
  3. The indicator (L.E.D.) should be green.
  4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
  5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
  6. Release both buttons.
 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s